Potable Water Tank Waterproofing Materials: What to Ask Before Work Starts
If you are a tenant, an owner or a facilities manager in Jeddah or Makkah, you may be told that a tank "just needs coating". It is worth slowing down. The wrong product can affect taste or odour, and an unsuitable system can fail early under constant immersion. This page does not recommend a brand or quote a standard. It gives you the questions to ask and the paperwork to expect, so you can judge the answers yourself. It is general guidance and does not replace the manufacturer's instructions or the rules of the relevant authority.
Waterproofing, cleaning and disinfection are three different jobs
- Waterproofing stops water passing through the tank structure, in or out. It involves a material that may touch the stored water.
- Cleaning removes sediment, algae and dirt from the walls and floor, usually after draining.
- Disinfection treats the surfaces and water microbiologically after cleaning, using products and strengths set by health guidance and the product supplier.
A single visit might include all three, but one never substitutes for another. A freshly coated tank that has not been cleaned properly can still hold contaminated water, and a spotless tank with a failing coating can still seep. Our drinking water tank waterproofing checklist walks through the whole job.
Why the material must be intended for drinking water contact
Some products release substances, taste or smell into water, especially in the first days after application. Others were never designed to sit under water for years. "Waterproofing" on the tin tells you the product resists water; it does not tell you it is acceptable for water you drink. What counts is what the documents say. Does the manufacturer state that this exact product is meant for drinking water contact? Who issued the certificate? Does it cover the product and the formulation being used on your site?
We deliberately do not name a standard or product here, because a general web page should not be your source of approvals. Instead, ask for the drinking-water-contact certificate from the manufacturer or the approved body, then check that the product name on the paperwork matches the label on the container.
Material families: common does not mean suitable
Concrete tanks are treated with many kinds of systems, for example polymer-modified cementitious coatings, resin-based systems and specialist membranes. It would be wrong to call a whole family suitable or unsuitable. The specific product, its documents and the way it is applied decide. Some systems need careful surface preparation and several coats with waiting periods; some need longer ventilation because of solvents or volatile components. A competent contractor can explain why a system was chosen for your tank and what happens if the conditions on the day are outside the data sheet limits.
Questions to put to the supplier or contractor
- What is the full product name, batch number and manufacturer?
- Is it intended for contact with drinking water? Show me the certificate.
- Who issued the document, and does it apply to this product and this version?
- Where is the technical data sheet, number of coats and thickness per coat?
- What surface temperature and moisture condition do you need at application?
- According to the manufacturer, how long should it cure before it touches water?
- How will the tank be ventilated during and after the work?
- What flushing procedure comes before first use, and where does the flush water go?
- How will you treat cracks, pipe entries and joints beforehand?
- Will there be a fill test to check the level over time?
How to judge the answers you get
| Your question | A reassuring answer | A reason to pause |
|---|---|---|
| Is it for drinking water contact? | A document from the manufacturer or an approval body naming this product | "They are all the same" or "we always use it", with no paper |
| How long before water touches it? | A time stated in the data sheet, with conditions | A verbal figure that differs from the data sheet |
| How will you ventilate? | A plan, protective gear and a person watching from outside | One person going in alone with no airflow |
| What happens before first use? | Flushing steps from the product instructions and safe disposal of the first water | Fill it and use it the same day |
| Will there be a fill test? | Yes, with the level watched for a set period | Handover with no test |
| What if the weather changes? | Application is postponed or the plan is adjusted | "We carry on whatever the weather" |
Drying, ventilation and flushing: what can safely be said in general
After any lining is applied, the surface needs time to dry or cure and any fumes need time to clear. That period varies by product and weather, so we do not give a figure here; the manufacturer's written instructions are the reference. After curing, the tank is normally filled, flushed and drained before use, and you should pay attention to any unusual taste or smell. If you notice one, stop using the water for drinking and cooking, speak to the contractor and the manufacturer, and ask the relevant health authority for advice where needed. If a lab test is required for your building, complete it before the water goes back into use.
Villas, apartment blocks and multi-tank buildings
Apartment in a building with a shared tank
Decisions usually sit with the owners' association or building management. Ask that product documents and the work schedule be shared with residents, along with the planned water cut-off and the date the water can be used after flushing.
Villa with ground and rooftop tanks
The ground tank is harder to reach and may face moisture from the soil, while the rooftop tank bakes in the sun. They may need different treatment; our page on underground vs overhead tank waterproofing explains the differences. Plan an alternative water supply for the duration.
Residential building with several tanks
Phase the work so that not every resident loses water at once, and use the same documented product across tanks where possible to simplify follow-up.
Mistakes to avoid
- Assuming any waterproofing product is fine because it "stops damp".
- Accepting verbal assurance in place of a document.
- Using the water straight after the first fill without flushing or waiting for the manufacturer's instructions.
- Ignoring ventilation, or letting one person go into the tank alone.
- Mixing up cleaning, waterproofing and disinfection.
- Coating a wet, cracked or dusty surface without preparation.
- Forgetting pipe entries, hatches and joints in the scope.
Paperwork and answers to request in writing
- Product name, manufacturer, batch number and a photo of the container.
- Technical data sheet and application instructions.
- Drinking-water-contact document from the manufacturer or approval body.
- Work plan with coats and waiting periods.
- Ventilation and safety plan for the tank.
- Flushing steps, fill test and first-use date.
- A final report that says what was done and what was not; see what a report should include.
Is the tank actually leaking? Check before you coat
If the level keeps dropping with no usage, or the rooftop tank overflows, the cause may be a float valve or a pipe joint rather than the walls. Look at rooftop tank float valve and overflow checks and the guide on underground tank level drop and salinity first. If you are weighing a roof tank against heat as well, waterproofing vs thermal insulation clarifies which problem each one solves.
Before you say yes: when to postpone the work
Postpone if the documents have not arrived, if residents have no alternative water, if the weather falls outside the data sheet limits, or if safe ventilation and trained staff are not available. A delay of a day or two costs far less than redoing the work or worrying about water quality afterwards. If you are unsure whether to patch or redo an old lining, repair or redo old waterproofing explains the general decision.
What drives the price, and how to compare quotes
A fair price cannot be set before an inspection. It depends on tank volume and number of tanks, the condition of the inside surfaces, the system selected and its documentation, access and ventilation difficulty, the drying time required, and whether the quote includes cleaning, disinfection, flushing and a fill test or only the waterproofing. Request quotes on the same scope so you compare like with like, and use the waterproofing quote comparison checklist. Local pages: tank waterproofing in Jeddah and tank waterproofing in Makkah.
Drinking water tank questions
Can any waterproofing product be used in a drinking water tank?
No. The product should be intended for drinking water contact according to the manufacturer or a recognised approval body, not just sold as a general waterproofer.
How do I check a product is meant for drinking water?
Ask for the data sheet and the drinking-water-contact certificate from the manufacturer or approved body, and check the product name on the paperwork matches the container.
Does waterproofing replace tank cleaning?
No. Waterproofing, cleaning and disinfection are separate steps. A single visit may combine them, but one does not replace another.
How long should I wait before using the water?
It depends on the product and conditions, so we give no general number. Follow the manufacturer instructions, then flush and drain the first fill before use.
What if the water tastes or smells odd afterwards?
Stop using it for drinking and cooking, contact the contractor and manufacturer, and ask the relevant health authority for advice if needed.
Is it safe to enter the tank myself?
We do not advise it. A tank is a confined space that needs ventilation, a standby person outside and protective equipment, and entry is best left to trained people.
Do you work on tanks in Jeddah and Makkah?
Yes, we serve Jeddah and Makkah. An inspection comes first, to assess the tank before a system is chosen. Call or send a WhatsApp message with photos.
Related pages
- Waterproofing and insulation hub
- Water leak detection hub
- Drinking water tank waterproofing checklist
- Underground vs overhead tank waterproofing
- Tank waterproofing in Jeddah
- Tank waterproofing in Makkah
- Rooftop tank float valve checks
- Underground tank level drop and salinity
- Waterproofing quote comparison checklist
- Repair or redo old waterproofing
- Home page
- النسخة العربية من الصفحة